This page was exported from New Lead2pass PDF And VCE Ensure IT Exam Pass 100% [ https://www.dumps4microsoft.com ]

Export date:Fri Feb 28 22:23:14 2025 / +0000 GMT

___________________________________________________


Title: [2017 New] Ensure Pass 400-101 Exam By Training Lead2pass New PDF Dumps (1-20)

---------------------------------------------------


2017 June Cisco Official New Released 400-101 Dumps in Lead2pass.com!  100% Free Download! 100% Pass Guaranteed!  I have already passed Cisco 400-101 certification exam yesterday….Scored 984/1000 in US! Many new exam questions added into the 2017 400-101 test! So I just come here to share with your guys and wish more 400-101 candidates can pass easily! Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/400-101.html  QUESTION 1Which mechanism does GET VPN use to preserve IP header information? A.&nbsp;&nbsp;&nbsp; IPsec tunnel modeB.&nbsp;&nbsp;&nbsp; GREC.&nbsp;&nbsp;&nbsp; MPLSD.&nbsp;&nbsp;&nbsp; IPsec transport modeAnswer: A QUESTION 2Refer to the exhibit. Which routes are advertised by the router? &nbsp; A.&nbsp;&nbsp;&nbsp; No routersB.&nbsp;&nbsp;&nbsp; BGP routes that originated from AS 65006 and BGP routes that originated on this routerC.&nbsp;&nbsp;&nbsp; All routersD.&nbsp;&nbsp;&nbsp; BGP routers sourced on this routerE.&nbsp;&nbsp;&nbsp; BGP routes that originated on RT1 Answer: B QUESTION 3For what reason might you choose to use an SVTI interface instead of a crypto map on a tunnel interface? A.&nbsp;&nbsp;&nbsp; SVTIs support dynamic routing protocols without GRE headers.B.&nbsp;&nbsp;&nbsp; SVTIs can support multiple IPSec SAs.C.&nbsp;&nbsp;&nbsp; SVTIs can carry non-IP traffic.D.&nbsp;&nbsp;&nbsp; SVTIs support CEF-switched traffic shaping. Answer: A QUESTION 4Refer to the exhibit. Which two statements about the output are true? (Choose two) &nbsp; A.&nbsp;&nbsp;&nbsp; BFD last failed 476ms ago on interface GigabitEthernet 0/3.B.&nbsp;&nbsp;&nbsp; BGP on RT1 has negotiated the BFD capability with its peer.C.&nbsp;&nbsp;&nbsp; BFD is active on interface GigabitEthernet0/3 and is using ICMP.D.&nbsp;&nbsp;&nbsp; BFD is active on interface GigabitEthernet0/3 and is using UDP.E.&nbsp;&nbsp;&nbsp; BFD is active for BGP on RT1 Answer: DE QUESTION 5Which two statements about PPP PAP are true? (Choose two) A.&nbsp;&nbsp;&nbsp; It requires two-way authentication.B.&nbsp;&nbsp;&nbsp; It can protect against playback attacks.C.&nbsp;&nbsp;&nbsp; It is supported only on synchronous interfaces.D.&nbsp;&nbsp;&nbsp; It is vulnerable to trial-and error attacks.E.&nbsp;&nbsp;&nbsp; Login attempts are controlled by the remote node. Answer: DE QUESTION 6In a simple MPLS L3VPN, which two tasks are performed by the PE router? (Choose two.) A.&nbsp;&nbsp;&nbsp; It establishes pseudo wires with other PEs.B.&nbsp;&nbsp;&nbsp; It exchanges VPNv4 and VPNv6 routes with CE Devices.C.&nbsp;&nbsp;&nbsp; It assigns labels to routes in individual VPNs.D.&nbsp;&nbsp;&nbsp; It forwards labeled packets to CE devices.E.&nbsp;&nbsp;&nbsp; It exchanges VPNv4 or VPNv6 route with other PE routers. Answer: CE QUESTION 7What are the two BFD modes? (Choose two) A.&nbsp;&nbsp;&nbsp; activeB.&nbsp;&nbsp;&nbsp; asynchronousC.&nbsp;&nbsp;&nbsp; passiveD.&nbsp;&nbsp;&nbsp; establishedE.&nbsp;&nbsp;&nbsp; demandF.&nbsp;&nbsp;&nbsp; synchronous Answer: BE QUESTION 8Which statement about the default QoS configuration on a Cisco switch is true? A.&nbsp;&nbsp;&nbsp; All traffic is sent through four egress queues.B.&nbsp;&nbsp;&nbsp; Port trust is enabled.C.&nbsp;&nbsp;&nbsp; The Port Cos value is 0.D.&nbsp;&nbsp;&nbsp; The Cos value of each tagged packet is modified. Answer: C QUESTION 9Which two statements about IPv4 and IPv6 networks are true? (Choose two.) A.&nbsp;&nbsp;&nbsp; In IPv6, hosts perform fragmentation.B.&nbsp;&nbsp;&nbsp; IPv6 uses a UDP checksum to verify packet integrity.C.&nbsp;&nbsp;&nbsp; In IPv6, routers perform fragmentation.D.&nbsp;&nbsp;&nbsp; In IPv4, fragmentation is performed by the source of the packet.E.&nbsp;&nbsp;&nbsp; IPv4 uses an optional checksum at the transport layer.F.&nbsp;&nbsp;&nbsp; IPv6 uses a required checksum at the network layer. Answer: AE QUESTION 10Refer to the exhibit. If R1 generated this response to the show debug command, which statement about its debug its debug output is true? &nbsp; A.&nbsp;&nbsp;&nbsp; After interface Fa0/0 becomes active, the router is allowed to generate debug output.B.&nbsp;&nbsp;&nbsp; When debug output is generated, only the user cisco is permitted to view it.C.&nbsp;&nbsp;&nbsp; R1 generates debug output as soon as IP address 192.168.0.0 is applied to interface Fa0/0.D.&nbsp;&nbsp;&nbsp; R1 generates debug output as soon as all three conditions are met. Answer: A QUESTION 11Which two EtherChannel modes can create an LACP EtherChannel ? A.&nbsp;&nbsp;&nbsp; onB.&nbsp;&nbsp;&nbsp; activeC.&nbsp;&nbsp;&nbsp; passiveD.&nbsp;&nbsp;&nbsp; autoE.&nbsp;&nbsp;&nbsp; desirable Answer: BC QUESTION 12Which command can you enter to disable logging for terminal lines? A.&nbsp;&nbsp;&nbsp; no logging trapB.&nbsp;&nbsp;&nbsp; no logging monitorC.&nbsp;&nbsp;&nbsp; no logging bufferD.&nbsp;&nbsp;&nbsp; no logging consoleE.&nbsp;&nbsp;&nbsp; no logging count Answer: B QUESTION 13Which two options are purposes of MSDP SA filtering? (Choose two.) A.&nbsp;&nbsp;&nbsp; to allow the filtering of PIM messages between peersB.&nbsp;&nbsp;&nbsp; to allow all SA message to be processed by MSDP peersC.&nbsp;&nbsp;&nbsp; to improve the scalability of an MSDP multicast environmentD.&nbsp;&nbsp;&nbsp; to reduce the number of multicast address that are shared to MSDP peersE.&nbsp;&nbsp;&nbsp; to allow the filtering of IGMP messages between peersF.&nbsp;&nbsp;&nbsp; to reduce the number of multicast address that are distributed to other devices in the same multicast domain Answer: CD QUESTION 14Which options is the default LACP load-balancing algorithm for IP traffic on Layer 3? A.&nbsp;&nbsp;&nbsp; the source and destinnation IP portB.&nbsp;&nbsp;&nbsp; the destination IP portC.&nbsp;&nbsp;&nbsp; the source and destination IP addressD.&nbsp;&nbsp;&nbsp; the destination PorteE.&nbsp;&nbsp;&nbsp; the source IP port Answer: C QUESTION 15Refer to the exhibit. Which network script automation option or tool is used in the exhibit? &nbsp; A.&nbsp;&nbsp;&nbsp; EEMB.&nbsp;&nbsp;&nbsp; PythonC.&nbsp;&nbsp;&nbsp; Bash scriptD.&nbsp;&nbsp;&nbsp; NETCONFE.&nbsp;&nbsp;&nbsp; REST Answer: B QUESTION 16Refer to the exhibit. Which two effects of this configuration are true? (Choose two.) &nbsp; A.&nbsp;&nbsp;&nbsp; The priority queue is disabled.B.&nbsp;&nbsp;&nbsp; Queue 1 is allocated 4 percent of the available bandwidth and queue 2 is allocated 2 percent of the available bandwidth.C.&nbsp;&nbsp;&nbsp; Queue 1 is a priority queue that is allocated 1/3 of the available bandwidth.D.&nbsp;&nbsp;&nbsp; Queue 1 is served twice as fast as queue 2.E.&nbsp;&nbsp;&nbsp; Queue 1 is a priority queue that is allocated 2/3 of the available bandwidth.F.&nbsp;&nbsp;&nbsp; Queue 2 is served twice as fast sa queue 1. Answer: AD QUESTION 17Which three statements are true about the spanning-tree loop guard feature? (Choose three)  A.&nbsp;&nbsp;&nbsp; Loop guard affects UplinkFast operation.B.&nbsp;&nbsp;&nbsp; Loop guard can be enabled on PortFast ports.C.&nbsp;&nbsp;&nbsp; Loop guard operation is not affected by the spanning-tree timers.D.&nbsp;&nbsp;&nbsp; Loop guard must be enabled on point-to-point link only.E.&nbsp;&nbsp;&nbsp; Loop guard cannot be enabled on a switch that also has root guard enabled.F.&nbsp;&nbsp;&nbsp;&nbsp; Loop guard can detect a unidirectional link in the same way as UDLD. Answer: CDE QUESTION 18Refer to the exhibit. Which statement about the 192.168.100.0/24 destination network is true? &nbsp; A.&nbsp;&nbsp;&nbsp; The Reported Distance for the Successor is 128256.B.&nbsp;&nbsp;&nbsp; The metric installed into the route table is 435200.C.&nbsp;&nbsp;&nbsp; he metric installed into the route table is 128256.D.&nbsp;&nbsp;&nbsp; The Reported Distance for the Feasible Successor is 409600. Answer: A QUESTION 19Which statement about STP port states is true? A.&nbsp;&nbsp;&nbsp; A port in the blocking state remains in that state for 30 seconds before transitioning to the listening state.B.&nbsp;&nbsp;&nbsp; Listening and learing are transtory port states that use the forward delay timer.C.&nbsp;&nbsp;&nbsp; When a port transitions to the learning state, it can send and receive data frames.D.&nbsp;&nbsp;&nbsp; A port in the blocking state learns address and receives BPDUs. Answer: B QUESTION 20Which two statements are true about an EVPL? (Choose two.) A.&nbsp;&nbsp;&nbsp; It has a high degree of transparency.B.&nbsp;&nbsp;&nbsp; It does not allow for service multiplexing.C.&nbsp;&nbsp;&nbsp; The EVPL service is also referred to as E-line.D.&nbsp;&nbsp;&nbsp; It is a point-to-point Ethernet connection between a pair of UNIs. Answer: CD Pass 400-101 is not difficult! But you need more practice tests, I spent 1 month prepared for this exam! Here is full version of the exam dump, I want to share with you, maybe it can help you a little bit: 400-101 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDQndBMUJTakdhaEE  2017 Cisco 400-101 exam dumps (All 708 Q&amp;As) from Lead2pass:  http://www.lead2pass.com/400-101.html [100% Exam Pass Guaranteed]

---------------------------------------------------


Images: 

---------------------------------------------------




---------------------------------------------------


Post date: 2017-06-28 07:58:02

Post date GMT: 2017-06-28 07:58:02

Post modified date: 2017-06-28 07:58:02

Post modified date GMT: 2017-06-28 07:58:02



____________________________________________________________________________________________


Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com